One of the most effective ways to lower risk of injury and increase results with penis enlargement is with HEAT. With an infrared heat pad, you are able to directly place the heat where you want it, controlling the energy and the results.

Infrared wave lengths have been shown to:

• Promoting healing
• Easing pain
• Relieving and reducing inflammation
• Protecting cells and tissues against oxidative stress
• Stimulating new production of cells and tissues
• Penetrate up to 10 times deeper than conventional heat pads (therefore targeting the tissues also targeted in many penis enlargement methods)

Infrared lamps or light panels can be used for similar results, however the heat waves are less targeted, and eye protection is necessary when using these types of products.

The heat pad can be powered by your power bank, USB wall adaptor or computer.

• 1 Power on/off button
• 3 heat settings
• Size: 18 x 12cm
• Velvety soft inner material
• Moisture absorbent neoprene outer material
• 80cm flat USB cable for power
• Graphene film inside entire pad
  (Wavelengths: 450-850nm)

Heat pad temperature range:

• Level 1 / Green - 23-28C
  Level 2 / Blue - 28-35C
  Level 3 / Red - 35-42C

Wavelengths: 450-850nm

Turning on, switching modes and turning off:

1. Turn the heat pad on by plugging into a power source of at least 2A (2 Amps) with a USB-A slot then press and hold the power button for 3-5 seconds.
2. Change the modes by pressing the power button once, Red = Highest setting, Blue = Middle setting and Green = Lowest setting. (Only ever use the setting that is most comfortable for you and allow a few minutes for the heat pad to warm up, it’s infrared so the heat will come slower however the effects penetrate deeper and last longer).
3. Turn off by unplugging from the power source.

Cleaning the heat pad:

1. ONLY when the heat pad is unplugged using a microfibre cloth slightly damp (well squeezed/rung out), softly wipe and dab the heat pad all over. Be sure not to saturate the heat pad with water under any circumstance.
2. Make sure to let the heat pad air and dry out for at least 60 minutes after cleaning before use.

Tips:

If the heat pad does not securely wrap and stay on, use either a clamp or length of One Wrap velcro to wrap around while in use to easily attach and detach.

Using the heat pad for 5-10 minutes before a PE session, during and even for 5-10 minutes after a PE session can assist the tissues becoming more pliable, less prone to injury and speed up recovery.

WARNINGS:

Do not use a setting that is too high or hot for you to handle.

It is your responsibility to use the heat pad safely and at the right setting.

Never leave the heat pad plugged in and unattended.

Never use the heat pad with water, lubrication or moisture of any sort.

Never use the heat pad for more than 2 hours per day.

Never direct the heat to the testicles.

The silicone sleeves are a part of The Ultimate Package which gives you 12 different PE methods by mixing and matching the tools, including vacuum extending, vacuum hanging and the passive healing sleeve.

Buying all these parts separately could end up costing you over $1200. At Total Man, it's yours for LESS THAN ONE QUARTER OF THAT!

WITH THE BASE KIT(NO ADD ONS) YOU WILL BE ABLE TO:

ADDING THE PULLEY SYSTEM WILL ALLOW YOU TO:

ADDING THE EXTENDER FRAME WILL ALLOW YOU TO:

WHAT'S INCLUDED IN THE BASE KIT (NO ADD ONS):

FOR COMPRESSION HANGING:

• Compression Hanger - view product details
• 2 x 1M TPE Theraband, 5cm wide, 0.5mm thick
• Polyester webbing strap - 400mm x 5cm
• Clamp-Mini Hanger - view product details

FOR VACUUM METHODS:

• 3 x Total Man Chambers (Sizes available 1-2-3-4-5)   - view product details
• Compact accordion pump - Super discreet and super effective enabling you to take it anywhere you need
• Silicone vacuum hose (Alternative method for pump)
• 3 x Spandex Sleeves for all Vacuum Chamber methods and Passive Healing Sleeve set-up - view product details
• 2 X 6-inch Silicone Sleeve (choice of 3 sizes: 21mm, 26mm, 32mm inner diameter) - view product details
• 3 rolls of Micropore tape - view product details

FOR WEIGHT HANGING METHODS:

• Solid 2-piece Plate Hanger that suits both standard plates (25mm bore/hole) or Olympic size plates (50mm bore/hole)   - view product details

ADDITIONAL ACCESSORIES:

• Leg Band plus easy to adjust Nylon tension system (for All Day Vacuum Stretching and Clamp Stretching) - view product details
• Total Man length and girth ruler

OPTIONAL ADD ONS (SAVE 30%+ BY ADDING THEM HERE)

FOR SEATED HANGING:

• Pulley System (allowing you to be fully seated while compression or vacuum hanging!)   - view product details

FOR EXTENDING METHODS:

• Rod Extender Frame - Using what's included in the Ultimate Package you can then Compression Extend or Vacuum Extend) - view product details

WANT FASTER RESULTS?

• Infrared heat pad - 3 heat settings (penetrate up to 10 times deeper than regular heat pads making tissues more pliable for stretching and increasing blood flow for healing)   - view product details

Vacuum hanging set up

Vacuum extending set up

Compression hanging (heatpad can be added)