These spandex sleeves are a must have when it comes to vacuum chamber methods and passive healing sleeve set ups with silicone sleeves.
They are super comfy and breathable sleeves that have changed the game for passive healing sleeve set ups, eliminating the need for using one full length of sleeve to get the job done and no more lubrication needed which made public wear a little daunting.
They are also the newest addition to any vacuum chamber method. These simple sleeves can be cut to the right length and shape to be used as an additional protective piece for the glans inside any vacuum chamber PLUS being a fabric, it also wicks moisture keeping the tape on the glans dry to ensure protection and keeps the valve from clogging. It's a win, win, win.
One of the quickest, most convenient and comfiest ways to anchor and hold your progress made with other stretching methods.
Unique combination of silicone and spandex sleeves makes for the ultimate passive healing sleeve.
Previously you would need to use a sleeve in its full length which was difficult, almost impossible to get on and take off without squeezing the life out of your poor lad.
Not to mention the need for lubrication for the silicone; as dry silicone and dry skin is never fun.
THE SET UP
Step 1: Simply slide or roll on the spandex sleeve letting the excess hang down. These spandex sleeve are super breathable and comfy for the skin.
Step 2: With your silicone sleeve cut into 1-4cm length sections, this makes for incredibly easy attaching right where you need it starting at the base of the shaft.
Step 3: Add the number of sleeve sections until the last sleeve sits just behind the glans.
Step 4: Roll the excess spandex sleeve back over the silicone sleeves securing the sections in place as if the sleeve is now one. Firm but not too tight, a breathable layer between the silicone and your skin with zero silicone rubbing causing irritation.
Step 5: Enjoy the freedom this combination provides letting you move about your day like normal while cementing your hard work and effort during stretching sessions like compression hanging, compression extending, manual methods, clamping and more.
Using these spandex sleeves for vacuum chamber methods has the following benefits:
A second length of spandex sleeve can be used on the outside of the chamber to keep the chamber, sleeve and rubber band from rubbing on the leg causing irritation and worse, gripping.
If your chamber cannot slide or move freely along the leg while in wear either sitting down, standing, moving around even in public, you have an issue. Vacuum pressure inside the chamber is dictated by the initial pressure set by your vacuum pump during attachment, the next dictator is the tension applied via hanging, extending or even all day stretching with a leg band.
This means that if the chamber grips to anything, your movement pulls the chamber increasing tension, resulting in an increase in the internal vacuum pressure, substantially risking injury such as abrasions and blistering. It is most crucial when in use with a leg band since the chamber will be pulled close to the leg.
These spandex sleeve reduces these risks by preventing anything parts catching as it covers the sleeve, rubber band and a portion of the chamber itself.
Measure your Resting Flaccid Width:
|Size||Laid flat width||Resting Flaccid Width|
|1||40mm (1.58 inch)||Up to 25mm (Up to 1 inch)|
|2||50mm (1.96 inch)||20 - 50mm (0.8 - 2 inch)|
THE ULTIMATE PACKAGE 4.0
The silicone sleeves are a part of The Ultimate Package which gives you 12 different PE methods by mixing and matching the tools, including vacuum extending, vacuum hanging and the passive healing sleeve.
Buying all these parts separately could end up costing you over $1200. At Total Man, it's yours for LESS THAN ONE QUARTER OF THAT!
FOR COMPRESSION HANGING:
FOR VACUUM METHODS:
FOR WEIGHT HANGING METHODS:
FOR SEATED HANGING:
FOR EXTENDING METHODS:
WANT FASTER RESULTS?
Vacuum hanging set up
Vacuum all day stretcher set up with passive healing sleeve
Vacuum extending set up