Sale

The Ultimate Package 4.0 - Everything

WATCH THIS VIDEO TO KNOW HOW TO MEASURE TO SELECT THE CORRECT SIZE IN THE DROP DOWN SECTIONS ABOVE...THIS IS TO ENSURE WE SEND YOU THE RIGHT SIZE PACKAGE.

PLEASE BE AWARE THIS VIDEO CONTAINS NUDITY AND IS ONLY SUITABLE FOR THOSE THAT ARE 18 YEARS OR OLDER


THE ULTIMATE PACKAGE 4.0 - EVERYTHING

All tutorials and videos for our devices are inside our FREE Video Library HERE.

PLEASE NOTE:

  • LEG BANDS V2 ARE CURRENTLY OUT OF STOCK, ORDERING NOW MEANS YOU WILL RECEIVE LEG BAND VERSION 1 AND VERSION 2 WILL BE SENT OUT WHEN THEY ARRIVE.
  • SIZE 5 CHAMBER IS GOING TO BE THE LATEST ADDITION TO THE RANGE, AVAILABLE BY SEPTEMBER 1ST, IF YOU ORDER A KIT WITH SIZE 5 CHAMBER, THIS WILL BE SENT OUT WITH YOUR LEG BAND VERSION 2.
  • YOUR ORDER WILL BE SENT OUT STRAIGHT AWAY AND THE PRODUCTS ABOVE WILL BE SENT LATER (SIZE 5 CHAMBER IF ORDERED)

This is one of the cheapest, high quality kits you will find on the net that comes with abundant support and assistance.


 

For detailed information on how this item is used for the ultimate results, check out THE ULTIMATE GUIDE HERE.

Shipping price will be at checkout before purchase is finalised or click here.


Buying all these parts separately could end up costing you over $1200. At Total Man, it's yours for LESS THAN ONE QUARTER OF THAT!

What's included

  • Compression Hanger 2.0 [NEW]
  • 2 x 1M TPE Theraband, 5cm wide, 0.5mm thick [NEW]
  • Polyester webbing strap - 400mm x 5cm [NEW]
  • Rod Extender Frame 3.0 [NEW]
  • 3 x Total Man 3.0 Chambers (Sizes available 1-2-3-4-5)
  • Compact accordion pump - Super discreet and super effective enabling you to take it anywhere you need [NEW]
  • Silicone vacuum hose (Alternative method for pump) 
  • 3 x Spandex Sleeves [NEW] for all Vacuum Chamber methods and Passive Healing Sleeve set up
  • 2 X 6 inch  Silicone Sleeve [NEW] (choice of 3 sizes: 21mm, 26mm, 32mm inner diameter)
  • Solid 2 piece Plate Hanger 2.0 [NEW] that suits both standard plates (25mm bore / hole) or olympic size plates (50mm bore / hole)
  • Leg Band 2.0 [NEW] plus easy to adjust Nylon tension system
  • Clamp-Mini Hanger 2.0 [NEW]
  • 3 rolls of Micropore tape
  • Total Man length and girth ruler
  • Pulley System 2.0 [NEW] (allowing you to be fully seated while compression or vacuum hanging!)
  • Infrared heat pad - 3 heat settings (penetrate 10 times deeper than regular hear pads)


PLEASE NOTE

  • NO RETURNS due to the nature of the product (Please see Shipping Policy and Return Policy for details)
  • NO WEIGHTS INCLUDED in this kit


IF YOU EVER WANTED TO PURCHASE CHAMBERS OR SLEEVES TO EITHER ADD TO YOUR ORDER OR AT A LATER DATE, YOU CAN USE THE SIZING GUIDE BELOW

Silicone Sleeve Sizing Guide

  • Measure your Stretched Flaccid Circumference of the mid-shaft (SFC):
    • Use a soft measuring tape or tailor's tape to measure
    • Wrap the tape around the circumference of the mid-shaft while STRETCHED OUT FLACCID and take the measurement
    • SFC up to 70mm - 110mm = Size 1: 21mm inner diameter sleeve
    • SFC 90mm - 130mm = Size 2: 26mm    inner diameter sleeve
    • SFC 110mm - 150mm = Size 3: 32mm    inner diameter sleeve
    • There is cross over because flaccid to erect sizes may change and during your use in any device your erect to flaccid state will fluctuate.

    Spandex Sleeve Sizing Guide

    • Same method as above measuring your Stretched Flaccid Circumference of the mid-shaft (SFC):
      • SFC up to 70mm - 120mm = Size 1: 40mm laid flat
      • SFC 90mm - 150mm = Size 2: 50mm laid flat


    Chamber Sizing Guide

    • Measure your Erect Coronal Ridge Circumference (ECRC):
      • Use a soft measuring tape or tailor's tape to measure
      • Achieve an erection (use a penis ring or band to assist with getting erect, optional)
      • Wrap the tape around the Circumference of the Coronal Ridge (the widest section of you erect glans) and take the measurement
     Size Internal chamber diameter Erect Coronal Ridge Circumference
    1 28mm Up to 88mm
    2 33mm 88 - 104mm
    3 38mm 104 - 120mm
    4 43mm 120 - 136mm
    5 48mm 136 - 151mm
    I do recommend purchasing 1 to even 2 sizes up as well, so if you're size 1, get size 2 and 3 as well. You may find you move through these sizes throughout your journey.

    Additional details on individual products

    TOTAL MAN COMPRESSION HANGER 2.0 - (CHECK OUT THE OVERVIEW VIDEO)

    PLEASE BE AWARE THIS VIDEO CONTAINS NUDITY AND IS ONLY SUITABLE FOR THOSE THAT ARE 18 YEARS OR OLDER

    • It's lighter, more sleek, easier to use, still super strong AND there is no hardware. That's right. No metal.
    • The main frames and parts are made from Nylon (one of the strongest plastics) PLUS reinforced with 30% Glass Fibre.
    • The cord is a 4mm polyester paracord with a breaking strength of over 300kg.
    • The main strap that holds this beast together is a 15mm polyester webbing strap with a breaking strength of over 150kg.
    • Its new sleek black look, strength and effortless function is unlike anything the market has seen.
    • Can tolerate more weight than your lad ever will
    • It will fit anyone up to a flaccid girth of 180mm flaccid mid shaft circumference
    • Our guarantee of the strength of the unit: "If it breaks, we replace it!"

     

    TOTAL MAN VACUUM CHAMBER 3.0

    • Injection moulded and contoured to the glans shape for optimal fit
    • Sleeve rim to avoid sleeve slipping up over the chamber
    • Reverse barbs on the lower outer chamber to secure the sleeve ensuring attachment
    • Thin chamber rim for a seamless chamber to sleeve transition eliminating the air pocket you will find with most other designs increasing risk of unwanted swelling behind the coronal ridge
    • One way valve with removable weight/tension clip
    • TPE Valve End to guarantee the vacuum seal
    • To get the right size, check out the sizing reference above

     

    TOTAL MAN LEG BAND 2.0

    Features:

    • Sleek, super slim discreet design
    • Black
    • Breathable
    • Super easy to adjust with the new buckle and slider

      This band is for Leg use ONLY and will not work around the waist. After plenty of trial and error, I believe that wearing any device pulled around the waist is extremely dangerous due to limited movement and high risk of jamming or jerking, dramatically increasing tension unexpectedly. Down the leg with the Leg Band attached below the knee seems to be the safest and most effective way to wear a vacuum chamber for discreet all day stretching.

    What does it come with?

    • Leg band - Neoprene inner layer for comfort and moisture wicking, polyester velcro attachable outer layer for secure fitting and tightness that won't wear for a LONG time!
    • Buckle and cord locking slider (Nylon reinforced with 30% Glass Fibre)
    • Elastic cord (3mm diameter x 600mm length):
      • Single cord creates 250g - 750g of tension
      • Cord doubled over creates 750g - 1500g of tension
    • Anodised black, alloy clip (10 x 4 xx 3mm) - compact and heavy duty

     

    CLAMP-MINI HANGER 2.0

    • The newest and most versatile clamp enabling many methods including:
      • Clamping for girth and the newest taping and attaching vacuum chamber method
      • Mini Hanger for light hanging (up to 4kg, anything heavier and I'd recommend using the Compression Hanger 2.0 with an almost limitless weight capacity)
      • Compression Extending with the Extender Frame 3.0 (also works with the older version Extender Frame 2.0)
      • Compression based stretching with leg band (please note: since this is a compression method, you still need to remove the device every 15 minutes to restore blood flow)
    • Main 2 frames and 2 sliders are made of Nylon reinforced with 30% Glass Fibre
    • Main strap holding this device together is a 10mm polyester webbing strap with a breaking strength of over 100kg
    • Main cord for light hanging, extending and stretching is a 3mm polyester paracord with a breaking strength of over 200kg

       

      TOTAL MAN SILICONE SLEEVES

      • Features:

        • 6 inches (15cm / 150mm) in length
        • Inside diameter:
          • Size 1: 21mm
          • Size 2: 26mm
          • Size 3: 32mm
        • Thickness: 3mm
        • Shore A Hardness: 5
        • Stretchy but strong and comfortable!
        • Can be used for any vacuum chamber method including vacuum hanging, all day stretching, extending plus as a passive healing sleeve with or without a chamber. It can also be used for protection with compression hanging and compression extending and more!
      • To get the right size, see the above sizing reference

       

      TOTAL MAN SPANDEX SLEEVES

      A must have when it comes to vacuum chamber methods and passive healing sleeves.

      For Vacuum Chambers

      These are the newest addition to any vacuum chamber method.
      These super simple sleeves can be cut to the right length and shape to be used as an additional protective piece for the glans inside any vacuum chamber PLUS being a fabric, it also wicks moisture keeping the tape on the glans dry to ensure protection and keeps the valve from clogging. It's a win, win, win.

      • Protection
      • Keeps tape dry
      • Keeps valve clean and free from clogging

      A second length of spandex sleeve can be used on the outside of the chamber to keep the chamber, sleeve and rubber band from rubbing on the leg causing irritation and worse, gripping. If your chamber cannot slide or move freely along the leg while in wear either sitting down, standing, moving around even in public, you have an issue. Vacuum pressure inside the chamber is dictated by the initial pressure set by your vacuum pump during attachment, the next dictator is the tension applied via hanging, extending or even all day stretching with a leg band. If the chamber grips to anything while your movement pulls the chamber increasing tension, this is going to increase the internal vacuum pressure substantially risking injury such as abrasions and blistering. It is most crucial when in use with a leg band since the chamber will be pulled close to the leg.

      For Passive Healing Sleeve

      These super comfy and breathable spandex sleeves have changed the game for passive healing sleeves eliminating the need for using one full length of sleeve to get the job done and no more lubrication needed which made public wear a little daunting.

        Information about the sleeves:

        • Spandex sleeves are 9 inches long and come in 2 sizes by laid flat width (Size 1 - 40mm, Size 2 - 50mm)
        • Material composition: Spandex (85%+ polyurethane) and polyester (up to 15%) with a cotton sewing thread

        TOTAL MAN ROD EXTENDER 3.0

        We have gone through a few versions and finally this is the one that is going to rock the market and world of extenders.

        It is one of many new products hitting the Total Man range.

        So, why is this so extender so great? What makes it so different?

        • While it is a beast like our older version, it's a lot more sleek, much more discreet and you can now customise the rod length with bolt on sections.
        • GOAL: The aim was to design an effective extender that could be worn discreetly while gaining from all other benefits this extender has to offer. More comfort, longer wear time at higher tensions, safer, smoother tension and movement, super strong, increased ease of use for attaching and detaching, simple to use.
        • BASE: Let's start with the base and work our way up. We kept the super round and super large surface area on the side of the base ring pressing on the pelvis. This was to decrease irritation and hot spots caused by thinner base rings with less round edges. A pointy edge or little surface area digging into the one spot on the pelvis or shaft was never fun. The base ring is now open, like a big round "U" shape. This means no matter what method you're using or how large your are, flaccid or erect, vacuum chamber on or not, you can simply slot the extender on the shaft and hook on.
        • HINGE: Next, the new hinge design. One of the biggest downfalls to all extenders, even our older design was the loose hinge effect...that design is practically like wearing blunt scissors latched to your poor lad waiting for a specific movement while you're trying to get on with your day until... "The NICK". Getting pinched on the arm or leg is one thing but, to have an unexpected pinch to your shaft or scrotum, now that will make a man jump or at least want to punch the closest wall or person. This hinge effect also meant an increased chance creating a hot spot with the base ring. Most base rings have a larger surface area if you were to use it at 90 degrees straight out from the pelvis BUT, no extender is worn like that. It will usually be worn up or down. Because of the loose hinge, most of the pressure is diverted to a tiny surface area on the edge of the base ring and not the flatter back side. SOLUTION: This new design, has two mighty tension springs. While it allows the base to rotate and pivot like usual, it also increases resistance the more the angle is increased resulting in a tilting of the base ring keeping the largest surface area where you want it. This increases comfort, decreases the chance of digging or hot spots and best of all you're not wearing scissors on your lad. The chance of your shaft or ball bag getting clamps between the base and the rods is near zero. This design is almost intuitive by nature. The base ring moves where you need it to move while getting out the way.
        • RODS: Next are the rods. There are 3 size rods to adjust your extender length. This frame with come with 25mm, 15mm, 11mm rods. This combination and the amount you receive in your kit will allow you to customise to the right length, resulting in the right tension every time. It's a set and forget build. When you need to increase or decrease the tension, the process is super simple, adding or removing the rods you need.
        • TOP SUPPORT AND TENSION: After spending so much time designing, reiterating, testing, the design wasn't 100%, it didn't feel right. Until... I remember the moment, sitting down at the dinner table with my wife and little one. It hit me. "Oh my!" along with a look that must have hit my face, probably made my wife think I left our child at the supermarket or something, no, she was sitting next to us.
          The issue with the designs that I was trying to make work was that they were too similar to all other designs in the market including our older version. Springs, metal sliders, clunky, unbalanced. Damn near drove me up the wall.
          The new model however is more a suspension type design using elastic cord just like the leg band of the all day stretcher. Smooth, accurate, safer. While elastic can create tension like metal springs, it's not as rigid, it's super flexible and can fluidly stretch around edges. The new top support shape has nice long arms allowing for adequate elastic length increasing tension travel length. The more tension travel   length the safer the device. Most other designs have a tension travel length of around 3cm. Unfortunately if one of your movements while you go about your day makes your extender max out the tension travel length, your tension could multiply in the matter of milliseconds...the type of tension that would match the stride of your body weight...this is not good. Broken skin, blisters, other injuries, I've been there.
          This design has the ability to have up to 10cm tension travel length. You won't even need this much, however again, the more  tension travel length, the safer your device. Since the new design suspends your lad instead of locking him in place, the tension is a lot more centred. During wear and while moving, the tension doesn't tilt the top support causing jams like other extenders. Since this design cannot tilt the top support and even if it did it doesn't matter. The tension can fluctuate fluidly, NEVER getting jammed increasing your risk of injury.
          The top support has a nice ergonomic shape, rounded to hug the leg if you're wearing it under clothing. The extender may look long and wide however this is for multiple reasons. The tension needs to come from in front of the vacuum chamber or compression device and the extender needs to be able to fit all chamber widths including the new Size 5. However this long and wide design  also means it sits flatter on the leg and under clothing. While I don't think any extender is the most discreet option, most other extenders in the market have your lad sitting on top of the device making the set up VERY thick and bulky which always tends to show through clothing...unless you're going for a clunky looking bulge down your leg, up to you.

        More information about the extender:

        • Can produce up to 6lbs of tension (thicker elastic available for greater tensions if needed producing up to 10lbs)
        • Total length from the bottom of the base to the top of the Top Support: 34cm
        • Extra pair of 25mm Rods available as add on's (not included in the base frame kit), making the total length 35.5cm.
        • Shortest set up: 16.5cm
        • Base frame kit weight: 130g
        • Material: Nylon reinforced with 30% glass fibre
        • Suits both Vacuum chambers for Vacuum Extending and Clamp for Compression Extending

        What you get:

        • Base ring, hinge springs and base adapters pre-built
        • 8 x 25mm Rod lengths
        • 6 x 15mm Rod lengths
        • 6 x 11mm Rod lengths
        • 2 x Top Support adapters
        • Top support, elastic, hook and grubs screws pre-built
        • Top support tool
        • Extra 4mm Heavy Duty Elastic cord for up to 10lbs of tension

           

          INFRARED HEAT PAD

          • 1 Power on/off button
          • 3 heat settings
          • Size: 22cm x 12cm
          • Velvety soft inner material
          • Moisture absorbent neoprene outer material
          • 80cm flat USB cable for power
          • Graphene film inside pad with wavelengths of 450-850nm

          Heat pad use and cleaning instructions:

          Turning on, switching modes and turning off -
          1. Turn the heat pad on by plugging into a power source of at least 2A (2 Amps) with a USB-A slot then press and hold the power button for 3-5 seconds.

          1. Change the modes by pressing the power button once, Red = Highest setting, Blue = Middle setting and Green = Lowest setting. (Only ever use the setting that is most comfortable for you and allow a few minutes for the heat pad to warm up, it’s infrared so the heat will come slower however the effects penetrate deeper and last longer).
          2. Turn off by unplugging from the power source.

          Cleaning the heat pad -

          1. ONLY when the heat pad is unplugged using a microfibre cloth slightly damp (well squeezed/rung out), softly wipe and dab the heat pad all over. Be sure not to saturate the heat pad with water under any circumstance.
          2. Make sure to let the heat pad air and dry out for at least 60 minutes after cleaning before use.

          Tips:

          If the heat pad does not securely wrap and stay on, use either a clamp or length of One Wrap velcro to wrap around while in use to easily attach and detach.

          Using the heat pad for 5-10 minutes before a PE session, during and even for 5-10 minutes after a PE session can assist the tissues becoming more pliable, less prone to injury and speed up recovery.

           WARNING:

          Do not use a setting that is too high or hot for you to handle.

          It is your responsibility to use the heat pad safely and at the right setting.

          Never leave the heat pad plugged in and unattended.

          Never use the heat pad with water, lubrication or moisture of any sort.

          Never use the heat pad for more than 2 hours per day.

          Never direct the heat to the testicles.


          PULLEY SYSTEM 2.0

          • NEW design, lighter and more user friendly then ever
          • Pulley wheel block, tightening table wedge, top attaching hook and weight hook are all made from a solid Nylon reinforced with 30% Glass Fibre
          • Main table strap is made from a 10mm polyester webbing strap with a breaking strength of over 100kg
          • Pulley cord is a 3mm polyester paracord with a breaking strength of over 200kg
          • This new design is so simple and easy to set up with it's no drilling required attachment. That's right no screws or holes in your table and you can use this set up on most tables with a maximum width of 650mm (2 screw holes are in the pulley block as an option too)
          • Set and forget, hook on and go
          • The top attachment hook has a stopper plate to rest detach and rest the hanging weight on the pulley block (so no need to detach weight plates). While, there are two finger grooves for easy handling to reattach

          SOLID 2 PIECE PLATE HANGER

          • Plate hanger base (suited for standard plates - 25mm bore/hole)
          • Adapter plate (slots onto Plate hanger base and is suitable for olympic size plates - 50mm bore/hole)
          • Material: Nylon reinforced with 30% Glass Fibre (REALLY STRONG)

           

          MICROPORE TAPE

          It sticks well for optimal effectiveness, it's super thin making it very comfortable and very breathable which is great for any vacuum chamber method increasing negative pressure to the glans.

          It is in our opinion the best protection that you can have while maintaining comfort and effectiveness for all the following methods:

          • Vacuum Hanging
          • Vacuum Extending
          • Vacuum All Day Stretcher
          • Passive Healing Sleeve with Vacuum Chamber
          • Manual Vacuum Chamber Stretches

          Alternative methods of protection are things like silicone glans caps in my opinion, don't do much at all and if anything could make things worse increasing risk of injury with falsely perceived protection.

          Please know, tape comes with most of our kits that have vacuum chambers.
          Tape is going to be one of the items that runs out so make sure to stock up.

          Please see our Video Library to see how to use the tape for the most effectiveness.
          Also know, removing the tape although slightly tedious it can come off quite easily with soaked with soap water and a little amount of time, then removed slowly.
          Please see the new taping tutorial above to know how to only need to tape once a day and remove the tape once a day. This is compared to the older version where you would need to re-tape every time you used you lad making vacuum chamber methods much hard to stick to.

           


          CLICK HERE 


          Customer Reviews
          5.0 Based on 16 Reviews
          5 ★
          100% 
          16
          4 ★
          0% 
          0
          3 ★
          0% 
          0
          2 ★
          0% 
          0
          1 ★
          0% 
          0
          100reviewers would recommend this product Write a Review

          Thank you for submitting a review!

          Your input is very much appreciated. Share it with your friends so they can enjoy it too!

          Filter Reviews:
            K
            07/09/2022
            Kevin
            United States United States
            I recommend this product

            Beyond Impressed!

            Just recently order this product, but I've been doing PE for a year or so now. I fudged up my order, so I emailed to ask for a correction, it was possibly the fastest response I've ever received from a company. It literally took two minutes to get an answer, and my mistake was corrected immediately. By far the best experience I've had dealing with customer service for any product, let alone PE gear. I'm beyond impressed, and I can't wait to start using this product!

            08/04/2022

            Total Man Shop

            Thank you so much for the feedback. Glad you enjoyed the experience so far.

            J
            04/01/2022
            Jack
            United States United States
            I recommend this product

            Great Quality Products

            I had been debating getting into PE for a while until I came across Reddit threads talking about Total Man. So after looking at all the products, I just decided to go with the everything kit. All the products are well made and easy to use if you watch the tutorial videos. So far, my favorite parts have been the vacuum system with the hanging plate and all-day stretcher. It is much easier to use than expected, and the tape does really work to keep your head from getting irritated. 3 days in so far, and no problems. I am looking forward to the results! If you are on the fence about buying from Total Man, I hope this review helped.

            06/05/2022

            Total Man Shop

            Great to hear, thank you so much for the feedback. Please keep an eye out for the new tutorial for taping about to release. A much better way to tape and instead of reapplying tape through out the day, you will only need to do it once!

            A
            03/01/2022
            Anonymous
            United States United States
            I recommend this product

            Excellent

            The videos are a tremendous resource and the full kit has everything required to add size. I am impressed by the quality of the different pieces, the comfort and function of each are excellent. I would recommend this program for anyone looking to improve themselves.

            OC
            02/07/2022
            Olen C.
            United States United States
            I recommend this product

            The good quality product and great workout program.

            Overall is experience is good. The video library had been great resource.

            06/05/2022

            Total Man Shop

            Thank you for the feedback.

            J
            01/22/2022
            Jason
            United States United States
            I recommend this product

            Let's Go

            Hey guys, Just wanted to check in. Quick recap. I started ****** traction 4 months ago with the quick extender pro. I don't have anything negative to say about that company or the device But that being said of course there could have been different ways and improvements in their design. Because of this, in my opinion, it is impossible to wear this for seven to nine hours a day like they want you to consistently. The most I've ever been able to do is seven hours And that was split into two different durations And with the size and shape of the device you can't wear it underneath your clothes comfortably or discreetly and I have to work and all my days off I have stuff I need to get done. That's why I usually only wear the quick extender for 4 to 4 and 1/2 hours a day. Because of this who wasn't getting the results as quick as I'd like. That is why I've ventured out to Total Man shop. So if you have his videos online And Mike seems like a good dude with a great product. I have had the all day stretcher for 45 days now. My God do I have absolutely nothing but positive things to say about that thing. The comfortability is incredible And it is always discreet If you were men's workout pants underneath your actual pants. If you do that then nobody will ever notice. So now my routine is changed because of it. Oh and thanks to the long silicone sleeve that was sent with my device I was able to cut a portion off of that to use as a sleeve for my Quick Extender. Not only helps comfortability but function and that thing as well. So this shop's products made another company's product better as well. Anyway my routine is now changed from before and a half hours a day of the extender now down to between 2 and 1/2 to 3 hours on the extender Then I do two separate series of the all day stretcher at around 6 hours a piece. Put it on in the morning before work at around 8:30 that I keep it on until I take my first **** which is usually right around 2:15-2:45. Then I keep it off until I get home around 6:00 and shower Then I put on the quick extender till about 10:00 to 10:30 And then I take that off give myself 10 minutes and then I put the all day stretcher back on and I go to sleep And normally I'll wake up at like 3:00 to 4:00 and I'll take it off to ****. I started somewhere around 7 & 3/16th before any of this. I gained about 7/16 in the 3 months before using the all day stretcher and In the last 45 days I've gained another 1/4 inches. Oh and so far I've gained 3/16 in girth. I will continue this until I go visit my girlfriend on March 7th for 3 weeks. And then once I come back I will continue on my road to 9 inches and 6.5 in girth. I'm currently at 6 & 1/8th in girth. Let's Get it fellas. Consistency and putting in the work makes a massive difference. If these products do not work for you it's because you did not work the product. No excuses

            06/08/2022

            Total Man Shop

            This was very motivating to read. :) Thank you for the feedback, much appreciated. Very glad to hear the products have served you so well. That being the case, I'm very excited for you to try out the new gear coming soon. I will continue to improve the products until I feel like they cannot be improved any more. Usually it takes someone trying another product to have a great deal of appreciation for the products and how they feel in comparison. Great to hear about your results. Amazing! That of course only comes with as you said consistency and putting in the work which you obviously have. Keep it up. Looking forward to hearing about your further progress.